Job Title
-  Chief Analogue Elec Eng
Enquire about this vacancy
|
| Salary - £40-50,000 |
Location - Bedfordshire |
| Type - perm |
Ref - 1320CEA |
Chief Analogue Electronic Engineer
We are looking for a Chief Electronic Engineer for a global manufacturer working within the electronic industry. This is a senior role for someone with a number of years experience in Analogue Circuitry Design and Digital Systems Design. You will be managing and leading the design and development of new products and working as part of a large R&D team director for the Chief Technical Officer.
Responsibilities will cover a range of engineering projects. You will oversee circuit design, define specifications and designing prototype circuits.
Experience:
· You will have over 8 years experience in analogue circuit design, design etc.
· You will ideally have good digital understanding with ideally a track record of innovation.
· Some software or firmware would be a bonus.
· Minimum BSc (or equivalent) in Electronic Engineering
Package of up to £45k-55k based on experience.
Location: Bedfordshire
Please send CV's to Jobs at Twinserve com
|
 |
Job Title
- Analogue Design Engineer
Enquire about this vacancy
|
| Salary - £40-55,000 |
Location - Bedfordshire |
| Type - Perm / Contract |
Ref - 1320ADE |
Analogue Electronics Design Engineer
Skills: Analogue Electronics Design Engineer We are looking for aAnalogue Designer for our client, a global manufacturer working within the electronic industry. This is an important position for the design of ciruits, controls and monitoring electronic equipment where you will be actually designing new products and working a part of a large R&D team. Responsibilities will cover a range of engineering projects but focused on hardware and possible firmware design. Your tasks will include circuit design, defined specification, schematic entry, designing prototype circuits, boards and testing of prototypes
Experience: You will have over 4 years experience in analogue design, circuit design etc.
You will ideally have some digital design with ideally a track record of innovation
Some software or firmware would be a bonus.
Minimum BSc (or equivalent) in Electronic Engineering
Good rate or salary £40k-60k plus package based on experience.
Contract or permanent roles on offer.
Please send CV's to Jobs at
|
|
Job Title
- Digital / Analogue Designer
Enquire about this vacancy
|
| Salary - £35-45,000 |
Location - Bedfordshire |
| Type - perm |
Ref - 1320DA |
Digital / Analogue Designer Engineer
We are looking for a Digital / Analogue Designers for a global manufacturer working within the electronic industry. This is an important role for someone with a number of years experience in the Analog Circuitry Design and Digital Design. You will be working on the actually designing of new products and working as part of a large R&D team.
Responsibilities will cover a range of engineering projects. You will over see circuit design, microprocessor , schematic entry, designing prototype circuits, boards and testing of prototypes
Experience:
· You will have over 3 years experience in analogue and digital design.
· You will ideally have a good understanding of Digital Techniques, MPU, Communications exp. with microprocessors.
· You will have a good understanding of design for EMC
· Minimum BSc (or equivalent) in a relevant technical subject
Package of up to £30k-45k based on experience.
Location: Bedfordshire
Please send CV's to Jobs at Twinserve com
|
|
Job Title
- Program Manager
Enquire about this vacancy
|
| Salary - £40-50,000 |
Location - Bedfordshire |
| Type - perm |
Ref - 1320PM |
Technical / Electronic Program Manager
We are looking for a Technically / Electronic oriented Program Managers to join our client, a global manufacturer working within the electronic industry. This is a senior role for someone with a number of years experience in project management to lead and steer complex product projects. The successful candidates will have a proven track record in managing large complex projects.
Experience:
· You will have over 5 years experience working as a Technical Project Managers and be able to manage more than one concurrent project is essential.
· You will ideally have experience in managing projects in the Electronics / Electrical / Manufacturing
· Able to manage teams of in-house and contract staff
· It would be a bonus to have an exp. in Safety Related, Ethernet Products or Industrial Networks
· You must have good customer facing skills.
Good contract rate or package of up to £45k-55k based on experience.
Contract or permanent roles on offer.
Location: Bedfordshire
|
|
Job Title
- European Sales Director
Enquire about this vacancy
|
| Salary - Euro 150-200,000 |
Location - Munich Germany |
| Type - perm |
Ref - 1905ESD |
European Sales Director - Semiconductor / Electronics
We are looking for an excellent experienced technical sales manager to take on the role of European Sales Director for an international semiconductor company. Your primary role will be to manage and drive the European sales team to achieve excellent strategic design wins. You will lead the sales team, support the sales managers, field applications engineers and manufacturer's representatives. It will be important of you to establish executive-level relationships with Tier 1 senior customer management personnel plus you will oversee the team's distribution efforts in order to successfully engage with Tier 2 and 3 customers. You will help grow and diversify our clients customer base.
Desired Experience:
· You will ideally have 5-10 years of sales management experience including managing Field Sales and Field Applications Engineers.
· You will ideally have Semiconductor Sales experience and could have experience with Wireless, Analog, IC Analogue, Mixed Signal or Digital product lines
· It would be a bonus to have experience managing manufacturer's representatives and distributors.
· You should have direct experience with Tier 1 Electronics, PC and/or cellular handset manufactories or design firms.
· You will have excellent organizational skills and the ability to motivate and drive international sales teams
· You will need to be fluency in English and would ideally speak German or French
· It would be a bonus to have a degree, masters or MBA
You will be expected to travel up to 50% of your time.
Package: The total package based on experience but up to Euro 200,000 p.a
Location: München / Munich, Germany
|
|
Job Title
- Mechanical / Engineer Manager
Enquire about this vacancy
|
| Salary - Eur100-120,000 |
Location - Germany |
| Type - Perm |
Ref - 0513PDM |
Our multinational client is looking for an excellent Senior Manager ideally with Mechanical / Engineering exp. to take responsibility for the performance management of the international product development team consisting of +32 R&D professionals in 2 EU countries. This is very important and challenging role contributing to operational as well as strategic decisions.
We are looking for a real leader who will join the R&D Management Team and will make the product development team a centre of excellence producing market leader solutions and products.
Your overall responsibility is to manage mechanical design and laboratory processes within Performance, Noise and Hydraulic Developments. This position holder will be one of the key players involved in taking the design and laboratory functions to the next level through harmonizing and optimizing the core R&D processes based on consumer requirements and the newest technology innovations.
Experience:
We are looking for an experience senior manager with excellent leadership and team management skills who has experience in running complex R&D projects ideally within the white goods, domestic appliances and mechanical or electrical industry.
- Engineering background, with preferably mechanical eng.
- Demonstrated ability of working through a remote team
- A leadership style that delegates, empowers, coaches and develops people
- Be considered as role model in leadership; having leadership experience and driving development towards a goal and achieving it by managing (in remote and with dotted line responsibility) other managers and professionals
- A leadership style that delegates, empowers, coaches and develops people
- Good interpersonal and cross-cultural skills on all levels
- Good analytical ability and you support the business pro-actively
- Experience in running complex RD projects
- Knowledge of lab activities and various simulations tools
- Fluent English, any other language a bonus
Excellent package:
Salary level: EUR 90.000-110.000 p.a. plus 20-25% bonus, benefits & relocation
|
|
Job Title
- ASIC or SOC Design Engineer
Enquire about this vacancy
|
| Salary - Eur 40 - 60,000 |
Location - France |
| Type - perm |
Ref - 0520ASIC |
Our client is looking for a ASIC or SOC Engineer to be part of the functional team specialized in the design and development of “System on Chip” for wireless applications for the mobile.
Expereince:
+2 years of experience minimum in ASIC or SOC design or development.
You will have some of the following:
Applied experience of Static Timing Analysis on SOC / ASIC (STA, scan chain, tool primetime of Synopsys, First encounter, Physical compiler, magma)
·Experience in simulation with Modelsim
·Applied experience of VHDL and/or Verilog languages
·ASIC/SOC design flow
·Data base management and scripting languages (TCL, perl ) design integration requires the execution of the following main activities:
·Scripting (PERL, TCL) Version control tools (synchronicity, clearcase)
·Wireless SOC hardware design
·RTL development
·Synthesis, Validation
·Front End Design, synthesis & validation
·Fluent or good English
Location : Nice France.
Package : Salary € 35 – 50,000 plus good package
|
|
Job Title
- PCB Designer with RF
Enquire about this vacancy
|
| Salary - Good Package |
Location - Yorkshire |
| Type - Permanent |
Ref - 060912PCB |
Our client is looking for a PCB Designer with RF and Power Amplifiers to design and create schematics prior to PCB design using View logic and Power logic and to design PCB's with a mix of logic and RF features.
Skills and Experience:
Experience in creating schematics and designs for PCB using View logic and Power logic.
Experience in design PCB's with RF features
History of interfacing with electrical and mechanical designers to define PCB parameters.
Experience in producing Gerber format files from designs for external subcontractors.
Salary: Good package.
|
|
Job Title
- Process Development Engineer
Enquire about this vacancy
|
| Salary - |
Location - North East |
| Type - Perm |
Ref - 060912PDE |
Our client is looking for a Semiconductors Process Development Engineer to carry out the design and development of semiconductor processes, work with production staff to transfer processes into production and process support for developed processes. Evaluation, procurement, qualification and release to manufacturing of new process equipment and technologies
Skills and Experience:
· 5 years experience in a semiconductor or manufacturing environment
· Proven ability and expertise in III-V semiconductor process development
· Knowledge and experience of physical analysis techniques eg. RBS, AES, TEM, SEM (EDAX), AFM
· Project leadership/management skills
· Ability to perform materials, process & device characterisation
· Understanding of electronic devices
· Minimum of a B.Sc, B.Eng in a relvant discipline
Salary: Excellent package.
|
|
Job Title
- Analog IC Design Engineer
Enquire about this vacancy
|
| Salary - £40-50,000 |
Location - Switzerland |
| Type - Perm |
Ref - 2405AN |
IC Analog Design Engineer
Our client is looking for a design of IC Analogue Designer engineer to work on the complex analogue radio integrated circuits on CMOS processes.
Qualifications and Experence: You will have at least 4 years' experience analog mixed mode CMOS process.
Design, simulation and measurements of analog/mixed mode circuits in CMOS proceses.
Good knowledge of analog and mixed-mode functional blocks like PLLs, filters, A/D and D/A converters, power management systems.
Very good expertise of Sigma-Delta loops would be an asset. Self committed, reliable, flexible, team worker
Innovative, customer oriented, rigorous, able to take initiatives.
Our client is a wireless IC semiconductor company and urgently need an experienced engineer.
Good package offered.
Please send CV's to James Gardiner
|
|
Job Title
- Senior PCB Designer
Enquire about this vacancy
|
| Salary - £20-25,000 |
Location - Surrey |
| Type - Perm |
Ref - 1304PCB |
PCB Designer Our client is looking for a senior PCB designer to work on the design, development and production of high spec. PCB's using in, experience on AutoCAD or other packages is an advantage. The products must confirm to stringent safety testing, EMC testing, and standards. Our client is a medium sized manufacture of safety equipment. The role offers excellent scope for advancement, training and technical development.
The ideal candidate will have up to 3 years relevant experience in PCB Design with experience on AutoCAD or other design package.
EMC testing and quality control experience is a bonus.
Good package with bonus.
|
|
Job Title
- FPGA Design Engineer
Enquire about this vacancy
|
| Salary - Based on Exp. |
Location - The Netherlands |
| Type - Perm |
Ref - 0308DE |
Our client is looking for a Lead Design Engineer with FPGA design exp. VHDL skills, board design and layout with a good knowledge of embedded software development. This role requires a broad range of experience in design of complex embedded products and a special understanding of VHDL.
The Lead Engineer is responsible for many aspects of a projects, coaching junior staff, leasing with other teams and clients.
Voor deze rol is ruime ervaring met het ontwerpen van complexe embedded producten en specifieke affiniteit met VHDL nodig. Daarnaast hebben zij een goed technisch inlevingsvermogen, een pro-actieve, pragmatische houding en verantwoordelijkheidsgevoel. De topper die we zoeken verstaat ook de kunst van teambegeleiding en coaching. Een TU/HTS opleiding elektronica met minimaal 5 jaar ervaring is noodzakelijk.
·Minimum of +3 years experience in FPGA design using VHDL/Verilog;
·Working with ASIC Advantage;
·Digitial electronics designs; working with XilinX devices;
·Digital signal processing;
·Bachelor or Master's degree in Computer Science & Digital Electronics;
·Technical communication skills with commercial feeling;
·Fluency in Dutch or English
|
|
Job Title
- Senior Analogue IC designer
Enquire about this vacancy
|
| Salary - Eur 30,000 |
Location - Madeira, Portugal |
| Type - Perm |
Ref - 0123AIC |
Our client is looking for a Analog IC CMOS designer / Senior Analogue IC designer. You will have a PhD or masters degree in electronics and several (+2)years of experience in development of analogue CMOS circuits. You have expertise in design of video rate analogue building block's such as amplifier's and switched capacitor circuitry in standard CMOS technology. Experience with CMOS Image sensors is an advantage but not a must. You are motivated, can accept responsibility and take the initiative. You have an independent working style and can solve emerging problems with creative solutions. You have capabilities in analysing and structuring problems and. You are looking to widen your horizons and develop your skills with challenging tasks and are motivated to help building up a design group. Job description: After getting familiarized with CMOS image sensors you will lead complete design projects from specification through design, layout production and characterization phase. You will be responsible for the over all performance analysis, the design of analogue blocks and the specification of the digital control electronics. You will help building up a sensor design team and become a design group leader. You report directly to the board of directors.
|
|
Job Title
- Layout Engineer Analogue CMOS
Enquire about this vacancy
|
| Salary - |
Location - Madeira, Portugal |
| Type - 0123LE |
Ref - 0123LE |
Our client is looking for a Layout Engineer - Analogue CMOS circuits. You will have a completed engineering education in integrated electronics and experience in layout of analogue CMOS circuits. You have experience in the layout of analogue integrated circuits in CMOS technology. You are motivated, can accept responsibility and take the initiative. You have an independent working style and can solve emerging problems with creative solutions. You are looking to widen your horizons and develop your skills. Job description: You will do physical layout of CMOS image sensors. You will be responsible for the layout of entire analogue image sensor cores, including on pitch electronics such as pixel matrix and readout addressing as well as layout of standard analogue functional blocks. Thereby you will get involved in the top level verification and acquire skills in the simulation and functional verification of CMOS image sensors. You will give feedback and influence the design cycle in order to improve our CMOS image sensor products.
|
|
Job Title
- RF Sales Engineer
Enquire about this vacancy
|
| Salary - £30-40,000 |
Location - Northern England and Scotland |
| Type - |
Ref - 0106SRF |
RF Sales Engineer with good RF, wireless or microwave experience. Our client is looking for an engineer with Good communication skills, experience in an electrical/electronic engineering environment and familiarity with the some experience in the test and measurement market. You will ideally have +2 years field sales experience but this is not essential. You will be a highly motivated team player with a desire to be involved with a wide range of customers and applications in the communications test and measurement business.
You target for the area for the North of England and Scotland. You will:
· Make target
· Promote and sell RF Instruments products and solutions to allocated customer base.
· Promote the Company’s business credibly at engineering, management and board levels.
· Liaise with other personnel (product specialists, sales management etc) to ensure specific business opportunities are converted into orders.
Education requirements:
· HND Electronic/Electrical Engineering or equivalent.
|
|
Job Title
- Digital Design Engineer
Enquire about this vacancy
|
| Salary - |
Location - France |
| Type - Perm |
Ref - 0520DDE |
Digital Design Engineer VHDL, FPGA, Perl. Our client is looking for a for a Digital Designer with good VHDL, FPGA and Perl experience. This person will be working with analogue Designer on mixed signal IC 's and must have some knowledge of analog design and semiconductor experinece. We believe this position might not suit a SoC Designer working on the latest 65nm process but somebody with interests outside of very high level design. You will have more that 3 years experience VHDL, FPGA ( or ASIC ) design and have worked with Perl. Experience of Analogue and digital design, semiconductor. You will be working on our clients semiconductor and ICs product range. Good package and salary based on experience. Please send CV's to James at Twinserve.com contract or permanent roles.
|
|
Job Title
- Analog Design Engineer
Enquire about this vacancy
|
| Salary - £40- 50000 |
Location - South West U.K. |
| Type - Permanent |
Ref - 26012AD |
Our client, a market leading provider of Semiconductors, is looking for a Analog designers with exp. in Low Voltage / Low Power CMOS design, wireless Analogue circuit design. This vacancy will offer the successful candidate an opportunity to work with a diverse international group on challenging low power mixed-signal projects. This is a "Lead Engineering" role and therefore some Team Leading experience would be preferred.
Analog designers are needed for the various analog portions of the ICs. These portions include light resolution, over sampled data converters, micro-amp differential amplifiers, buffers, LED-drivers, PLLs, voltage and current references, filters, low resolution ADC and DACs, oscillators and trimming circuits optimized for low current and voltage. DSP will be used extensively too.
Education and Skills Required:
Minimum of honours Eng'g Degree and 5+ years relevant experience.
Desirable Experience: IC Analogue Design Skills · Familiarity with Low Voltage / Low Power CMOS design and Cadence design tools.
· Bandgap and PTAT references.· PLLs. · Filters. · Crystal oscillator. · Voltage Doubler. · Data converters. Wireless Analog / Mixed Signal
|
|
Job Title
- Analogue IC Design Eng
Enquire about this vacancy
|
| Salary - £30-60,000 |
Location - UK |
| Type - perm |
Ref - 0319AIC |
Our client, a leading semiconductor and wireless company, are looking for excellent Analogue IC Design Engineers to work on various Analogue Integrated CMOS Circuit, Bluetooth, WiFi and UWB projects.
You will have +3 years general analogue, analogue IC experience with wireless, RF circuits, IC CMOS, IC and CAD layout designing analogue circuits for integrated transmitter and/or receiver systems. Our client is working on a single chip CMOS radios including the design of UWB radio.
-Experienced: in RF or Analogue IC design involving an extensive variety of circuit blocks.
-Extensive experience in the use of mixed-mode simulation tools, schematic capture and layout tools, DRC and LVS tools is a must.
-Understanding of IC fabrication processes, characteristics and parameters.
We're searching for innovative design engineers for our small but rapidly growing design centre near Nice. In this role, you’ll be responsible for RF and Analogue design on sub-micron CMOS. Responsibilities:
Translating specifications into actual design architectures and circuits
Providing the definition, design, simulations and layout of a wide of RF and Analogue circuit blocks
Supporting the test and characterisation of designs during evaluation - release to production.
Excellent Package and salary.
|
|
Job Title
- Team Leader RF IC Designer
Enquire about this vacancy
|
| Salary - £40-60,000 |
Location - Romania |
| Type - Perm |
Ref - 0101TL |
RF IC Design Engineer / Team Leader with good analog skills.
Our client, as young fast growing fabless semiconductor company working on IC components for the wireless market, is looking for a RF IC Designer / Team Leader to work on state of the art radio solution, WiMAX and the next generation wireless 4G technology.
You will manage the RFIC Design Team and the RF lab Test Team in Bucharest and be responsible for the outputs generated by these teams. You will contribute to the definition of new RFIC developments and will report to the CTO of the company
Experience:
You will have a minimum of 5 years experience in analogue / RF IC design and development.
Good team leading / management skills and experience.
We are looking for a technically passionate IC Design specialist with deep knowledge of RFIC design techniques and with desire to managing a design team.
Salary based on experience with good package plus stock options
Please send CV’s to Jobs at Twinserve.com
|
|
Job Title
- Technical Sales Manager
Enquire about this vacancy
|
| Salary - Eur 60-100,000 |
Location - Germany / Sweden |
| Type - Perm |
Ref - 0316TSM |
Technical Sale Manager
Our client is looking for a Technical Sales Manager with a good understanding of electronics specifically RF / microwave, MLCC and EMI electronics components plus marketing / BD to focus on the German and Scandinavian OEM/EMS markets.
-Our client is a international supplier of niche / application specific products for the Electronics, Medical, Telecom, Military, Aerospace and Space market providing RF/Microwave Passive components, Single layer & Multilayer caps, Thin film products, Precision Trimmers and, MLCC & EMI Filters.
-Your role would be to provide technical guidance and support to distributors and representatives and to provide direct support to OEM’s & EMS’s in Germany, Sweden and Finland from a base in Northern Germany, Sweden or Benelux. The main industry targets are telecom network / basestation, wireless telecom RF & Microwave, Defense, Military, Aerospace, Space and Distribution EMS companies.
Experience: You have 5–10 years experience in technical sales / business development with a good technical understanding or electronics. You will be able to identify new sales/product opportunities for the group.
-Build and maintain strong technical and commercial relationships at targeted accounts.
-Develop marketing and advertising plans for the region.
-Author or co-author technical and sales documentation in one or more languages as necessary. -Have effective oral and written communication skills, effective time management skills, excellent customer relation skills, confidentially and good judgment, developed computer skills.
-You will have a degree in electronics / engineering or related subject.
-Be able travel freely and at short notice within Europe.
Languages: Good or fluent German and English. Scandinavian languages would be a bonus.
Location: Germany, ideally Northern Germany near an Airport or Sweden near an airport or a Benelux country. Design, development and product manufacturing are based in the UK, USA and Asia.
Package: Salary based on experience plus group and performance bonus.
Please send your CV to Jobs at Twinserve.com
|
|
Job Title
- Analogue IC Section Leader
Enquire about this vacancy
|
| Salary - £50-75,000 |
Location - Scotland |
| Type - perm |
Ref - 2405GLA |
We are looking for a Design Section Leader to lead the Power IC team within a leading semiconductor company. You will have IC Power management Analog / Mixed Signal, Transistor exp. and be able to take complete responsible for IC product design, including simulating, modelling, testing and reviewing design concepts and implementations. You will focus on the design and develop Power Management IC products for portable applications and participate in product definition with marketing and applications engineering. You will oversee the physical layout and final verification of products.
Experience:
You will have some of the following experience:
·You will have a minimum of 5 years Analog or mixed signal & transistor level design experience in the successful design of Analog IC’s in Bipolar and / or CMOS.
·Direct experience with power management IC’s is preferred, but not an absolute requirement.
·Leadership ability and drive to design excellent products.
·Demonstrated ability to design at the block level & transistor level.
·Basic understanding of power management circuits is required.
·A BSc., BSEE or equivalent degree.
|
|
Job Title
- Electronics Engineer
Enquire about this vacancy
|
| Salary - £20-35,000 |
Location - London |
| Type - Perm |
Ref - 0601EE |
Electronics Engineer – Switched Mode Power Supply with experience in assembly and C programming
Our client is looking for an Electronics Engineer to work on highly demanding projects within the wireless, telecommunication and automotive industry.
You will have a minimum of 2 years industrial experience and a degree or HND in electronics engineering.
·Experience in switched-mode power supply SMPS design.
·Experience in assembly and C programming
·Experience in operating laboratory equipments etc oscilloscope, soldering iron.
·Experience in mechanical drawing, mechanical assembly and general prototyping.
·Ability to identify and debug problems in an iterative manner.
·Must be attentive to details.
This role is initially a contract role for a 6 month period but with a definite chance of full time employment if desired. Location London
Please send CV’s to Jobs at Twinserve.com
|
|
Job Title
- PLL Applications Engineer
Enquire about this vacancy
|
| Salary - £70,000 |
Location - UK |
| Type - perm |
Ref - 1905PLL |
PLL Applications Engineer
We are looking for a senior PLL Applications Engineer to work on PLL analogue / digital IC semiconductor, telecom products. This role is an important, senior role within this international semiconductor company working on range of products. Provide applications support from concept through production. Develop product definition & design-in support through interfacing with clients, field sales & marketing personnel. Responsible for new product definition & verification, documentation of application notes, creation of datasheets / specifications, design & layout of evaluation boards. Work closely with Design Engineering throughout the design process to ensure compliance to specifications & customer requirements. Active participation with marketing and design engineering in the evolution of product definition.
Experience:
+8 years experience working on the characterization of low phase PLL.
-Related work experience in an IC products involving PLL technology a bonus..
-Commitment to staying current with the continuous evolution of technology by reading trade journals, technical publications, & attending training seminars & conferences.
-Must be an effective communicator with the ability to interface at all levels within the organization, possessing a thorough command of the English language, written as well as verbal.
-A degree in Electronics or relevant subject.
Package up to £70,000. Salary £45-50,000 plus bonus up to £20,000 and package.
|
|
Job Title
- Baseband Egnineer
Enquire about this vacancy
|
| Salary - £40 - 50,000 |
Location - Southeast / East England |
| Type - perm |
Ref - 1909BBE |
Baseband Engineer with digital, mixed signal and analog / RF exp.
Our client is looking for a Baseband Engineer to help design and test new applications, evaluation boards and prototype platforms for development purposes;
You will support to test engineering for the development of production test and support customer designs based on GPS. Hopefully you will contribution to future developments by providing new product ideas.
Experience/skills required:
You will have good digital electronics exp. with use of appropriate Schematic, Layout and simulation tools
Tool flow for FPGA logic design and implementation
Mixed signal designs with a good technical understanding of analogue / RF semiconductors and board-level products.
Volume manufacture and design for Test, Manufacture and standards compliance. Some experience of low level software.
Experience Desired:
Background in engineering design of components or products targeted at the high volume consumer market; introduction of products to manufacture in the far east.
Experience in a IC semiconductor or module manufacturing company, working within a new product introduction (NPI) procedure framework; ideally ramped to high volume production for cost driven end markets;
Tool flow for FPGA logic design and implementation;
Familiarity with Labview environment for test automation.
BSc or equivalent degree
Please send your CV’s to Jobs at Twinserve.com
Good package and salary based on expereince
|
|
Aerospace
Electronics/Hardware
I.T.
/ C.A.D.
Optics/Fibreoptics
RF
Wireless
Software